Series 25 Enclosures.
Prices are based on the following specifications
with additional options available as listed.
Prices exclude freight and taxes.
·
Alum-a-frame 25 series design with removable
panels for access on two long sides. Acoustical panels are
16 ga. Galvanized steel.
Walls and roof filled with 1 acoustical foam.
Includes vent hood for heat rejection and
inlet/discharge cfm.
One piping penetration is included if in same panel
as vent hood
·
Enclosures are fully assembled and
skidded(if over 6 in height check with factory for
availability)
·
Standard wind loading-70mph can go higher as
an option.
·
Standard submittal drawing lead-time is 1
week. Standard lead-time from approval is 3-4 weeks.
Square
footage is based on the outside dimensions of the
enclosures rounded to the nearest square foot.
Weight of skidded enclosure can be estimated at 5
lbs/ square foot for freight purposes.
A.
<
50 square
feet use 21.00/square feet
B. <
100 square feet use 16.75/square feet
C.
>/= 100 square feet use 14.50/square feet
D.
Option-120 V fans, single phase, 20-75 hp units
$200.00
E.
Door-36wide x up to 72 high, $260.00
F.
Aluminum Construction Option-Base Price X1.18
G.
Adder for additional openings, $ 75.00
H.
Enclosure Exterior Painted Pre-coated
Galvanized Steel Option-Base Price X 1.22
I.
Stainless Steel Option-Base Price X 2.25
J.
3 phase fans and explosion proof fans
consult IES
K.
Special construction or specifications- consult IES
L.
Quantity discounts (more than 3 of same size and
design) or special pricing-consult IES
Series 45 Enclosures.
Prices are based on the following specifications
with additional options available as listed.
Prices exclude freight and taxes.
·
Alum-a-frame design with removable panels
for access on two long sides. Acoustical panels are 16 ga.
Galvanized steel. Walls
and roof filled with 2 acoustical absorption and lined
with 22 ga galvanized perf. Removable panels lined with
acoustical foam to reduce weight.
Includes 120 V fan and vent hood for heat rejection
and inlet/discharge cfm.
One piping penetration is included.
·
Enclosures are fully assembled and
skidded(if over 10 in any direction check with factory
for availability)
·
If removable panel height is over 7 high
a header may be required.
See below.
·
Standard wind loading-70mph can go higher as
an option.
·
Standard submittal drawing lead-time is 1
week. Standard lead-time from approval is 3-4 weeks.
Square
footage is based on the outside dimensions of the
enclosures rounded to the nearest square foot.
Weight of skidded enclosure can be estimated at 5
lbs/ square foot for freight purposes.
A.
<100 square feet use 23.00/square feet
B. <150 square feet use
21.00/square feet
C.
<200 square feet use 19.00/square feet
D.
<250 square feet use 18.25/square feet
E.
<350 square feet use 17.50/square feet
F.
<450 square feet use 16.50/square feet
G.
>450 square feet use 15.80/square feet
H.
Option-50Hz fans, single phase, 20-75 hp units
$200.00
I.
Option-50Hz fans, single phase, >75 hp units
$50.00
J.
Option-220V fans on 20-75 hp units $225.00
K.
Option-220V fans on >75 hp units $25.00
L.
Door-36wide x up to 84 high, $375.00
M.
Double Door-72 wide x up to 84 high,
$730.00
N.
Header-$20.00 per linear foot.
O.
Aluminum Construction Option-Base Price X1.18
P.
Deduct for 1 ½ acoustical foam instead of
perf, $0.30 per square foot.
Q.
Adder for additional openings, $ 95.00
R.
Adder for 4 walls-Base price X 1.1
S.
Adder for removable panels lined with perf-Base
price x 1.05
T.
Enclosure Exterior Painted Pre-coated
Galvanized Steel Option-Base Price X 1.22
U.
Stainless Steel Option-Base Price X 2.25
V.
3 phase fans and explosion proof fans
consult IES
W.
Special construction or specifications- consult IES
Quantity discounts (more than 3 of same size and
design) or special pricing-consult IES
|
IQFA-1
IB10-Lag 
IBSC-25
w/frame
IQFA
w/frame
SONEX One 
SONEX Classic 